Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Bumper Cover / Fascia: Service and Repair




Bumper Cover - Front









Removal and Installation

1. Remove the fender splash shields. For additional information, refer to Front End Body Panels Fender Splash Shield.

2. Remove the 5 radiator sight shield screws.

3. Remove the 4 front bumper cover side bolts (2 each side).

4. Remove the fender mouldings. For additional information, refer to Exterior Trim and Ornamentation [1][2]Diagrams.

5. If equipped, disconnect the fog lamp electrical connector.

6. Disconnect the side marker lamp electrical connector.

7. Remove the 2 front bumper cover front bolt covers.

8. Remove the 2 front bumper cover-to-bumper front bolts.
- To install, tighten to 13 Nm (115 lb-in).

9. Remove the front bumper cover.

10. To install, reverse the removal procedure.