Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2011 >> Transit Connect L4-2.0L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Transmission Speed Sensor >> Service and Repair >> Turbine Shaft Speed (TSS) Sensor
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Turbine Shaft Speed (TSS) Sensor




Turbine Shaft Speed (TSS) Sensor





Turbine Shaft Speed (TSS) Sensor









Removal

1. Remove the battery tray. For additional information, refer to Battery, Mounting and Cables Battery Tray.

2. Remove the Air Cleaner (ACL) assembly. For additional information, refer to Intake Air Distribution and Filtering Intake Air System Components - Exploded View.

3. Disconnect the Turbine Shaft Speed (TSS) sensor electrical connector.





4. Remove the TSS sensor bolt and sensor.
- Check the TSS sensor bore.





5. Inspect the O-ring seal for nicks or cuts; install a new O-ring if necessary.





Installation

1. Apply a light coat of clean transmission fluid to the O-ring seal before installation.





2. NOTE: Apply thread sealer to the bolt.

Install the TSS sensor and bolt.

- Tighten to 10 Nm (89 lb-in).





3. Connect the TSS sensor electrical connector.





4. Install the ACL assembly. For additional information, refer to Intake Air Distribution and Filtering Intake Air System Components - Exploded View.

5. Install the battery tray. For additional information, refer to Battery, Mounting and Cables Battery Tray.

pro multis · About Operation CHARM