Seat Armrest - Second Row

Seat Armrest - Second Row

NOTE: RH similar, LH shown.









Removal

NOTE: LH similar, RH shown.

1. Pivot the armrest to the vertical position.

2. Locate the armrest cover zipper in the armrest cover zipper pocket.





3. Unzip the armrest cover.





4. Partially invert the armrest cover to access the armrest pivot bolt.

5. Remove the armrest pivot bolt and the armrest.





Installation

1. NOTE: Make sure the armrest pivot guide pin on the seat backrest is lined up to the armrest pivot guide pin slot on the armrest.

With the armrest in the horizontal position, install the armrest onto the seat and start the armrest pivot bolt by hand.


2. NOTE: Make sure the backrest cover is not pinched between the armrest spacer and the armrest bracket.

Tighten the armrest pivot bolt to 45 Nm (33 lb-ft).


3. Position the armrest cover back onto the armrest.

4. Zip the armrest cover and tuck the zipper up into the armrest cover zipper pocket.