Rear Vision Camera: Service and Repair

Video Camera

Exploded View










Removal

1. Remove the liftgate trim panel. REFER to Liftgate Trim Panel .

2. NOTE: LH (Left Hand) side shown, RH (Right Hand) side similar.

Open the rear liftgate and remove the LH (Left Hand) and RH (Right Hand) liftgate body moulding nuts.
- To install, tighten to 3 Nm (27 lb-in).





3. Remove the 4 liftgate body moulding bolts and remove the liftgate body moulding.

- Disconnect the electrical connector.
- To install, tighten to 3 Nm (27 lb-in).





4. Remove the rear video camera screw and retainer, remove the rear video camera.

- Disconnect the electrical connector.






Installation

1. NOTE: The rear video camera guidelines will not display if the rear video camera is not configured.

Carry out the video camera configuration using a scan tool under Body> RVC Configuration.



2. To install, reverse the removal procedure.