Seat Backrest - Manual - Disassembly and Assembly

Seat Backrest - Manual

Disassembly

NOTE: For component identification and locations, REFER to Seat - Exploded View .

1. Remove the affected third row backrest. For additional information, REFER to Seat Backrest - Manual .

2. Remove the backrest cover. REFER to Seat Backrest Cover - Manual .

3. Remove the backrest foam pad.

4. Remove the 2 head restraint bolts.

- To install, tighten to 5 Nm (44 lb-in).

5. Remove the 2 head restraint nuts and the head restraint.

- To install, tighten to 24 Nm (18 lb-ft).

Assembly

1. To assemble, reverse the disassembly procedure.