Wheel Speed Sensor - Rear

Wheel Speed Sensor - Rear

Exploded View










Removal

1. Disconnect the wheel speed sensor electrical connector.

2. Detach the 2 pin-type retainers.

3. Detach the 2 grommets from the routing brackets.

4. Remove the rear wheel speed sensor bolt and the rear wheel speed sensor.

Installation

1. Position the rear wheel speed sensor and install the rear wheel speed sensor bolt.
- Tighten to 15 Nm (133 lb-in).

2. Attach the 2 grommets to the routing brackets.

3. Attach the 2 pin-type retainers.

4. Connect the wheel speed sensor electrical connector.