Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2012 >> Explorer FWD V6-3.5L >> Repair and Diagnosis >> Body and Frame >> Locks >> Key >> Testing and Inspection >> Passive Anti-Theft System (PATS) - with Intelligent Access (IA) >> Key Programming Using Diagnostic Equipment
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Key Programming Using Diagnostic Equipment




Key Programming Using Diagnostic Equipment

General Procedure

NOTE: To enter PATS (Passive Anti-Theft System) security access if no programmed IA (Intelligent Access) keys are available, start a vehicle session using a tear tag or PCM (Powertrain Control Module) part number. PATS (Passive Anti-Theft System) security access can still be granted even with the ignition off.

1. Insert the unprogrammed IA (Intelligent Access) key into the backup slot.

2. From the scan tool, enter TOOLBOX. Select Body>Security>PATS Functions and follow the IDS (Integrated Diagnostic System) on-screen instructions to enter PATS (Passive Anti-Theft System) security access.

3. From the scan tool menu select "Program additional ignition key" and follow the IDS (Integrated Diagnostic System) on-screen instructions.

4. NOTE: The engine will not start until there are at least 2 keys programmed.
The engine should now start with the IDS (Integrated Diagnostic System) key.

5. If it is desired to program an additional key (only up to 4 keys total can be programmed), insert the additional key into the backup slot and repeat Step 3 for the additional key that needs to be programmed.

pro multis · About Operation CHARM