Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2012 >> Explorer FWD V6-3.5L >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Ignition Coil >> Service and Repair >> Ignition Coil-On-Plug
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Coil-On-Plug




Ignition Coil-On-Plug

Material(s)






Removal

NOTE: Removal steps in this procedure may contain installation details.

1. Remove the ACL (Air Cleaner) outlet pipe. REFER to Intake Air System Components - Exploded View .

2.
- 5 Nm (44 lb-in).





3. NOTE: Use compressed air to remove any foreign material from the ignition coil-on-plugs and surrounding area before removing the ignition coil-on-plugs.

NOTE: When removing the ignition coil-on-plugs, a slight twisting motion will break the seal and ease removal.

NOTE: When installing apply a small amount of silicone brake caliper grease and dielectric compound to the inside of the ignition coil-on-plug boots before installation.

- 8 Nm (71 lb-in).





4. Inspect the ignition coil-on-plug rubber boot assembly for cracks, rips, or tears. Replace any damaged coil-on-plug rubber boots.





Installation

1. To install, reverse the removal procedure.

pro multis · About Operation CHARM