Component Description

Automatic Transaxle-Transmission External Controls - Select Shift

Component Description

The selector lever cable transfers the transmission operating mode from the selector lever to the automatic transmission. The indicated position of the selector lever is transferred to the transmission through the steering column mounted selector lever, or the floor-mounted selector lever, to the selector lever cable and down to the manual control lever on the transmission.

Brake Shift Interlock Actuator

The brake shift interlock system consists of:

- BSIA (Brake Shift Interlock Actuator) that is integral to the selector lever assembly.

- ignition switch.

- BPP (Brake Pedal Position) switch.

- BCM (Body Control Module).

Selector Lever Cable

The selector lever cable consists of:

- a cable that connects the transaxle manual control lever to the selector lever assembly.

- a cable grommet that is fastened to the floor pan.

- adjuster locking tab at the transaxle manual control lever.

Selector Lever

The selector lever consists of:

- Selector lever knob

- BSIA (Brake Shift Interlock Actuator) that is integral to the selector lever assembly.

- TCS (Transmission Control Switch) that is integral to the selector lever knob.

SelectShift Switch

The SelectShift (TM) switch is a toggle switch integral to the selector lever knob.If a new switch is required install a new selector lever knob.