Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2012 >> F 150 2WD V8-6.2L >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Ignition Coil >> Service and Repair >> Ignition Coil-On-Plug
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Coil-On-Plug




Ignition Coil-On-Plug





Removal and Installation

1. Remove the Air Cleaner (ACL) outlet pipe.

2. Remove the intake air resonator.

3. Disconnect the 8 ignition wires.

4. Disconnect the 8 ignition coil-on-plug electrical connectors.

5. Remove the 8 ignition coil-on-plug bolts.
- To install, tighten to 10 Nm (89 lb-in).


6. NOTE: When removing the ignition coil-on-plugs, a slight twisting motion will break the seal and ease removal.
Remove the 8 ignition coil-on-plugs.


7. NOTE: Verify that the coil-on-plug spring is correctly located inside the ignition coil-on-plug boot and that there is no damage to the tip of the boot.
To install, reverse the removal procedure.

- Apply a light coat of dielectric compound to the inside of the coil-on-plug boots.

pro multis · About Operation CHARM