Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2012 >> F 250 4WD Super Duty V8-6.7L DSL Turbo >> Repair and Diagnosis >> Powertrain Management >> Glow Plug System >> Glow Plug >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Glow Plug: Service and Repair




Glow Plug

Removal

1. Remove the LH or RH fender splash shield.

2. NOTE: It may be necessary to unthread the engine sound shield retainers from the engine.
Remove the 5 RH or 4 LH engine sound shield retainers and the RH or LH engine sound shield.

3. Using the tabs on the top of glow plug connector, pull the glow plug connector off the glow plug.

4. Remove the glow plug.

Installation

1. Install the glow plug.
- Tighten to 11 Nm (97 lb-in).

2. Pull the glow plug electrical connector out of the outer sleeve.





3. Connect the glow plug electrical connector to the glow plug and push the connector down to lock the connector on the glow plug.

4. Position the RH or LH engine sound shield and install the 5 RH or 4 LH engine sound shield retainers.

5. Install the LH or RH fender splash shield.
pro multis · About Operation CHARM