In-Vehicle Temperature Sensor

In-Vehicle Temperature Sensor









Removal and Installation

1. Remove the instrument cluster finish panel.

2. Remove the instrument panel lower support bracket cover bolt and remove the support bracket cover.

3. Remove the 3 instrument panel lower support bracket bolts and the support bracket.
- To install, tighten to 9 Nm (80 lb-in).






4. Disconnect the in-vehicle temperature sensor aspirator hose connection.

5. Detach the in-vehicle temperature sensor aspirator hose pin-type retainer.

6. Disconnect the in-vehicle temperature sensor electrical connector.

7. Remove the in-vehicle temperature sensor and aspirator hose as an assembly.

8. To install, reverse the removal procedure.