Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2012 >> Fiesta L4-1.6L >> Repair and Diagnosis >> Lighting and Horns >> Brake Light Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Brake Light Switch: Service and Repair




Stoplamp Switch









Removal and Installation

NOTICE: Do not press, pull or otherwise move the brake pedal while installing the stoplamp switch and cruise control deactivation switch. Install these switches with the booster push rod attached to the brake pedal and with the brake pedal in the at-rest position. Installing these switches with the brake pedal in any other position results in incorrect adjustment and damages the switches.

1. NOTE: The stoplamp switch is located above the cruise control deactivation switch (if equipped).

Rotate the stoplamp switch clockwise approximately one-eighth turn to remove the stoplamp switch.

2. To install, reverse the removal procedure.
- Perform the brake pedal switch adjustment. For additional information, refer to Vehicle Dynamic Systems Service and Repair.

pro multis · About Operation CHARM