Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Turn Signal Switch: Service and Repair




Steering Column Multifunction Switch

Removal and Installation

1. Pulling upward, detach the upper steering column shroud from the lower steering column shroud.
- Slide the upper steering column shroud out of the Instrument Cluster (IC) trim panel and remove the shroud.





2. Remove the 3 screws and the lower steering column shroud.





3. Remove the multifunction switch in the sequence shown.

1. Disconnect the electrical connector.

2. Push inward to release the locking clip.

3. Slide the multifunction switch upward on the carrier and remove the multifunction switch.





4. To install, reverse the removal procedure.