Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2012 >> Fiesta L4-1.6L >> Repair and Diagnosis >> Powertrain Management >> Fuel Delivery and Air Induction >> Fuel Pump >> Fuel Pump Control Unit >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Fuel Pump Control Unit: Service and Repair




Fuel Pump Control Module









Removal and Installation

1. Remove the LH front seat.

2. Remove the scuff plate trim panel and the cowl side trim panel.

3. NOTE: The Fuel Pump (FP) control module is located on the rear surface of the LH front seat mount.
Disconnect the FP (Fuel Pump) control module electrical connector.


4. NOTICE: Do not overtighten the fasteners or damage to the module may occur.

Remove the 2 FP (Fuel Pump) control module nuts.
- To install, tighten to 5 Nm (44 lb-in).


5. To install, reverse the removal procedure.
pro multis · About Operation CHARM