Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2012 >> Fiesta L4-1.6L >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Start / Stop Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Start / Stop Switch: Service and Repair




Start/Stop Switch









Removal and Installation

1. Remove the upper instrument panel finish panel.

2. Position aside the Front Controls Interface Module (FCIM) finish panel in the following order.
1. Remove the 4 upper screws.

2. Pull outward to detach the 2 lower clips.

3. Disconnect the FCIM (Front Controls Interface Module) electrical connector and position the FCIM (Front Controls Interface Module) finish panel aside.






3. Release the 2 start/stop switch tabs (upper and lower) and detach the start/stop switch from the instrument panel.

4. Disconnect the start/stop switch electrical connector and remove the start/stop switch.

5. To install, reverse the removal procedure.
pro multis · About Operation CHARM