Procedures

Transaxle Draining and Filling





1. With the vehicle in NEUTRAL, position it on a hoist.

2. Release the 7 retainers (2 shown) and remove the shift cable cover.





3. NOTE: Before removing, clean the area around the filler plug.
Remove the fill plug.






4. Using a suitable oil suction gun, fill the transaxle to the correct level with the specified fluid.
- Transaxle fluid level: 5-10 mm (0.196-0.393 in.) below the lower edge of the filler plug bore.






5. Install the fill plug.
- Tighten to 35 Nm (26 lb-ft).






6. Install the shift cables cover.