B-Pillar Trim Panel

B-Pillar Trim Panel

Removal and Installation

Lower trim panel

1. Remove the front door scuff plate.
- Pull upward on the scuff plate to release the clips.






2. Remove the rear door scuff plate.
- Pull upward on the scuff plate to release the clips.






3. Remove the lower B-pillar trim panel.
- Pull outward on the trim panel to release the clips.






Upper trim panel

4. NOTE: Inspect the safety belt D-ring cover for damage. If the safety belt D-ring cover does not remain in place, install a new cover.

Remove the safety belt D-ring cover.






5. Remove the safety belt D-ring bolt.
- To install, tighten to 40 Nm (30 lb-ft).






6. Remove the upper B-pillar trim panel bolt and remove the upper B-pillar trim panel.





All trim panels

7. NOTICE: To avoid damage to the B-pillar trim panels, remove any retaining clips from the body and attach them to the scuff plate trim panel before installing.

To install, reverse the removal procedure.