Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2012 >> Focus L4-2.0L >> Repair and Diagnosis >> Brakes and Traction Control >> Drum Brake System >> Wheel Cylinder >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Wheel Cylinder: Service and Repair




Wheel Cylinder

WARNING: Before beginning any service procedure, REFER to Safety Warnings . Failure to follow this instruction may result in serious personal injury.

Exploded View










Removal

NOTICE: Do not spill brake fluid on painted or plastic surfaces or damage to the surface may occur. If brake fluid is spilled onto a painted or plastic surface, immediately wash the surface with water.

NOTE: Removal steps in this procedure may include installation details.

1. Disconnect the brake tube-to-brake flexible hose fitting, remove the brake flexible hose clip and the brake flexible hose bracket bolt.
- To install, tighten the brake tube-to-brake flexible hose fitting to 15 Nm (133 lb-in).
- To install, tighten the brake flexible hose bracket bolt to 12 Nm (106 lb-in).





2. Disconnect the brake flexible hose-to-wheel cylinder fitting, remove the 2 wheel cylinder bolts and remove the wheel cylinder.
- To install, tighten the brake flexible hose-wheel cylinder fitting to 23 Nm (17 lb-ft).
- To install, tighten the wheel cylinder bolts to 12 Nm (106 lb-in).





Installation

1. To install, reverse the removal procedure.

2. Bleed the wheel cylinder. REFER to Component Bleeding .


pro multis · About Operation CHARM