Toe Adjustment - Rear

Toe Adjustment - Rear

WARNING: Before beginning any service procedure, REFER to Safety Warnings . Failure to follow this instruction may result in serious personal injury.

General Procedure

1. Bounce the vehicle to make sure that the suspension is in its normal resting position.

2. Using alignment equipment and the manufacturer's instructions, measure the toe.

3. Loosen the rear lower arm adjustment cam nut on both sides.





4. Bounce the vehicle to make sure that the suspension is in its normal resting position.

5. Adjust the toe setting by rotating the nut and eccentric washer.





6. Tighten the rear lower arm adjustment cam nuts.
- Tighten to 90 Nm (66 lb-ft).





7. Recheck the toe settings, adjust as necessary.