Flywheel: Service and Repair

Flywheel

WARNING: Before beginning any service procedure, REFER to Safety Warnings . Failure to follow this instruction may result in serious personal injury.

Special Tool(s)






Removal

1. With the vehicle in NEUTRAL, position it on a hoist. REFER to Jacking and Lifting Vehicle Lifting.

2. Remove the clutch disc and pressure plate. REFER to Clutch Disc and Pressure Plate .

3. Install 303-103 (T74P-6375-A) and remove the 6 bolts and the flywheel.

- Discard the bolts.






Installation

1. NOTE: Special bolts are used for installation. Do not use standard bolts.
Install the flywheel, the 6 new bolts and the 303-103 (T74P-6375-A).
- Tighten in the sequence shown in 3 stages:
- Stage 1: Tighten to 50 Nm (37 lb-ft).
- Stage 2: Tighten to 80 Nm (59 lb-ft).
- Stage 3: Tighten to 112 Nm (83 lb-ft).





2. Install the clutch disc and pressure plate. REFER to Clutch Disc and Pressure Plate .