Roll Restrictor

Roll Restrictor

WARNING: Before beginning any service procedure, REFER to Safety Warnings . Failure to follow this instruction may result in serious personal injury.

Exploded View










Removal

1. With the vehicle in NEUTRAL, position it on a hoist. REFER to Lifting Points .

2. Remove the 8 retainers and the underbody insulator.





3. Remove the roll restrictor bolt.

4. Remove the roll restrictor-to-transmission bracket bolt.

5. Remove the roll restrictor.

Installation

1. Install the roll restrictor.

2. Install the roll restrictor-to-transmission bracket bolt.
- Tighten to 86 Nm (63 lb-ft).

3. Install the roll restrictor bolt.
- Tighten to 86 Nm (63 lb-ft).

4. Install the underbody insulator and the 8 retainers.