Rear Shelf: Service and Repair

Parcel Shelf









Removal and Installation

1. Remove the LH and RH C-pillar trim panel. For additional information, refer to C-Pillar Trim Panel C-Pillar Trim Panel.

2. Position the rear seat back rest to the flat position.

3. Remove the 3 parcel shelf pin-type retainers.

4. Slide the rear safety belts through the parcel shelf slots until the safety belts are positioned under the parcel shelf.

5. NOTE: During installation, if equipped with a sunshade, make sure that the foam blocks on the parcel shelf are engaged on the sunshade tabs. RH side shown LH side similar.

Remove the parcel shelf.

- Lift the front of the parcel shelf upward. Reach under the parcel shelf toward the back glass to separate the Velcro(R) at the base of the parcel shelf.

- With slight pressure, pull the parcel shelf forward to remove.






6. To install, reverse the removal procedure.