Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2012 >> Transit Connect L4-2.0L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Transmission Speed Sensor >> Service and Repair >> Turbine Shaft Speed (TSS) Sensor
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Turbine Shaft Speed (TSS) Sensor




Turbine Shaft Speed (TSS) Sensor





Turbine Shaft Speed (TSS) Sensor









Removal

1. Remove the battery tray.

2. Remove the Air Cleaner (ACL) assembly.

3. Disconnect the Turbine Shaft Speed (TSS) sensor electrical connector.





4. Remove the TSS (Turbine Shaft Speed) sensor bolt and sensor.
- Check the TSS (Turbine Shaft Speed) sensor bore.






5. Inspect the O-ring seal for nicks or cuts; install a new O-ring if necessary.





Installation

1. Apply a light coat of clean transmission fluid to the O-ring seal before installation.





2. NOTE: Apply thread sealer to the bolt.
Install the TSS (Turbine Shaft Speed) sensor and bolt.

- Tighten to 10 Nm (89 lb-in).






3. Connect the TSS (Turbine Shaft Speed) sensor electrical connector.





4. Install the ACL (Air Cleaner) assembly.

5. Install the battery tray.
pro multis · About Operation CHARM