At Every Oil Change Interval As Indicated

At every oil change interval as indicated by the information display*

- Change engine oil and filter.**

- Rotate the tires.

- Perform a multi-point inspection (recommended). Refer to Check Every Service (Multi-Point Inspection)

- Inspect the automatic transmission fluid level.

- Inspect the brake pads, shoes, rotors, drums, brake linings, hoses, and parking brake.

- Inspect the cabin air filter.

- Inspect the engine cooling system strength and hoses.

- Inspect the exhaust system and heat shields.

- Inspect the rear axle and U-joints. Lubricate any areas with grease fittings (AWD vehicles).

- Inspect the half-shaft boots.

- Inspect the steering linkage, ball joints, suspension, tie-rod ends, driveshaft and U-joints. Lubricate any areas with grease fittings (AWD vehicles).

- Inspect the tires, tire wear, and measure the tread depth.

- Inspect the wheels and related components for abnormal noise, wear, looseness, or drag.

* Do not exceed one year or 10,000 miles (16,000 km) between service intervals.

** Reset the Intelligent Oil-Life Monitor after each engine oil and filter change. Refer to Service and Repair