Courtesy Lamp Bulb: Service and Repair

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the entry/exit lamp unit from its mounting location.

Entry/Exit Lamp Bulb Remove/Install:

3. Grasp the lamp housing firmly in one hand, then rotate the bulb holder counterclockwise and pull it straight out from the housing with the other hand.
4. Remove the bulb from the bulb holder.

INSTALLATION
1. Insert the bulb into the entry/exit lamp bulb holder.
2. Grasp the entry/exit lamp housing firmly in one hand, then insert the bulb holder into the housing and rotate it clockwise to lock it in place with the other hand.
3. Reinstall the entry/exit lamp unit into its mounting location.
4. Reconnect the battery negative cable.