Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Door Switch: Service and Repair

REMOVAL
1. Disconnect and isolate the battery negative cable.

Door Jamb Switch Remove/Install:




2. Open the door and remove the screw that secures the door jamb switch to the hinge pillar of the door opening.
3. Pull the door jamb switch away from the mounting hole in the pillar far enough to access and disconnect the vehicle wire harness connector from the back of the switch.

INSTALLATION
1. Position the door jamb switch close enough to the mounting hole in the hinge pillar of the door opening to reconnect the vehicle wire harness connector to the back of the switch.
2. Position the door jamb switch into the mounting hole in the hinge pillar.
3. Install and tighten the screw that secures the door jamb switch to the hinge pillar.
4. Reconnect the battery negative cable.