Low Pressure Pump

WARNING: NO SPARKS, OPEN FLAMES OR SMOKING. RISK OF POISONING FROM INHALING AND SWALLOWING FUEL. RISK OF INJURY TO EYES AND SKIN FROM CONTACT WITH FUEL. POUR FUELS ONLY INTO SUITABLE AND APPROPRIATELY MARKED CONTAINERS. WEAR PROTECTIVE CLOTHING.

REMOVAL
1. Disconnect negative battery cable.
2. Remove vacuum pump.

Vacuum Pump And Low Fuel Pump Assemblies:

3. Detach fuel lines at low pressure pump.
4. Remove low pressure pump.

INSTALLATION

NOTE: Clean sealing surfaces, replace seal if necessary.

1. Prime the low pressure pump with the appropriate fuel.
2. Attach low pressure fuel pump to cylinder head front cover. Tighten bolt to 9 N.m (80 lbs.in.).
3. Attach fuel lines to low pressure pump.
4. Install vacuum pump.
5. Reconnect negative battery cable.

WARNING: USE EXTREME CAUTION WHEN THE ENGINE IS OPERATING. DO NOT STAND IN A DIRECT LINE WITH FAN. DO NOT PUT YOUR HANDS NEAR PULLEYS, BELTS OR FAN. DO NOT WEAR LOOSE CLOTHING.

6. Start engine and inspect for leaks.