Rear

STABILIZER BAR

REMOVAL
1. Raise and support the vehicle.





2. Remove the stabilizer links at the bar (Fig. 4).
3. Remove the stabilizer bar clamp at the axle (Fig. 4).
4. Remove the bracket (Fig. 4)
5. Remove the stabilizer bar from the vehicle.

INSTALLATION
1. Install the stabilizer bar to the axle.





2. Install the stabilizer bar clamps and bracket, center the bar then tighten to 25 Nm (18 ft. lbs.) (SRW) (Fig. 4) or Tighten to 70 Nm (52 ft. lbs.) for (DRW) (Fig. 5).
3. Install the stabilizer bar to the stabilizer links and tighten to 95 Nm (60 ft. lbs.) (Fig. 4) or (Fig. 5).
4. Lower the vehicle.