Operation CHARM: Car repair manuals for everyone.
Home >> Freightliner >> 2006 >> Sprinter 3500 L5-2.7L DSL Turbo >> Repair and Diagnosis >> Heating and Air Conditioning >> Blower Motor Resistor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Blower Motor Resistor: Service and Repair

REMOVAL
1. Disconnect and isolate the negative battery cable.

Blower Motor Resistor Block:




2. Depress the locking tab and remove the blower motor resistor from the ventilation housing by sliding the resistor inboard.
3. Depress the two locking tabs and disconnect the wire harness connector from the blower motor resistor.
4. Remove the blower motor resistor from the engine compartment.

INSTALLATION
1. Connect the wire harness connector to the blower motor resistor and engage the two locking tabs.
2. Install the blower motor resistor into the ventilation housing and engage the locking tab. The housing is indexed to allow mounting in only one position.
3. Reconnect the negative battery cable.
pro multis · About Operation CHARM