Operation CHARM: Car repair manuals for everyone.
Home >> Freightliner >> 2007 >> Sprinter 2500 V6-3.0L DSL Turbo >> Repair and Diagnosis >> Heating and Air Conditioning >> Blower Motor >> Service and Repair >> Installation - Rear
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation - Rear






INSTALLATION




1. Position the rear blower motor (4) to the rear evaporator housing (3) and install the retaining screws (6). Tighten the screws to 5 Nm (44 in. lbs.).
2. Connect the wire harness connectors (5) to the blower motor.
3. Install the rear evaporator insulator and cover (2) to the top of the vehicle and install the retaining screws (1). Tighten the screws to 2 Nm (17 in. lbs.).




4. Install the rear condenser cover bracket (2) onto the rear condenser bracket (5) and install the four retaining bolts (3). Tighten the bolts securely.
5. Install the nut and bolt (4) that secure the rear A/C suction line (1) to the rear condenser cover bracket. Tighten the nut securely.
6. Install the rear condenser cover to the top of the vehicle and install the retaining screws. Tighten the screws to 2 Nm (17 in. lbs.).
7. Reconnect the negative battery cable.
pro multis · About Operation CHARM