Headlamp

HEADLAMP




1. Position the headlamp washer nozzle (1) to the mounting bracket.
2. Install and tighten the two screws (2) that secure the nozzle to the mounting bracket. Tighten the screws securely.
3. Reconnect the washer supply hose (3) to the barbed nipple near the back of the nozzle.
4. Remove the clamp from the supply hose.
5. Position the front of the front wheel house liner to the bottom of the front bumper fascia.
6. Reinstall the fasteners that secure the wheel house liner to the bottom of the fascia.
7. Lower the vehicle to the floor.
8. Reinstall the cover onto the nozzle below the front lamp unit.