Operation CHARM: Car repair manuals for everyone.
Home >> Freightliner >> 2007 >> Sprinter 3500 V6-3.0L DSL Turbo >> Repair and Diagnosis >> Body and Frame >> Bumper >> Front Bumper >> Service and Repair >> Service Manual >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation






INSTALLATION

Assembly




1. Install the fog lamps (12, 13) and install the screws (11).
2. Install the Parktronic sensors (10, 9, 8, 6, 5, 4) and seat the retaining lugs fully.
3. Attach the Parktronic wiring harness (7) to the bumper and seat the central connector clip fully (14).
4. Install the air grille (1) and seat fully.
5. Install the lower grille covering (2) and seat the clips fully.
6. Install the step platform and hook to bumper at the rear.
7. Seat the front of the step platform fully.
8. Install the front bumper.

Installation




1. Install the front bumper (7) onto the vehicle.
2. Connect the Parktronic System electrical connector (9).
3. Connect the electrical connectors (8) to the front fog lamps on the left and right sides.
4. Install the outside temperature indicator temperature sensor (10) into the bumper (7).
5. Seat the front bumper (7) fully and install the bolts (4, 5).
6. Tighten bolts (4) to 25 Nm (18 ft. lbs.).
7. Tighten bolts (5) to 20 Nm (15 ft. lbs.).




8. Install the grille and grille covering (1).
9. Install the license plate bracket.
pro multis · About Operation CHARM