Installation

INSTALLATION




1. Spread the differential housing (1).

CAUTION: Never spread over 0.3 mm (0.011 in). If the housing is over-spread, it could be distorted or damaged.

2. Install differential case (2) into the housing (1) with bearings, cups (3) and shims.
3. Loosely install differential bearing cap bolts.




4. Remove spreader (2) and adapters (1) from housing.
5. Tighten bearing cap bolts to 70 Nm (52 ft. lbs.).
6. Install axle shafts.
7. Install differential cover and tighten bolts to 65 Nm (48 ft. lbs.).
8. Fill differential housing with lubricant.