Rear

REAR

CAUTION: Do not allow the wiper arm to spring back against the glass without the wiper blade in place or the glass may be damaged.

CAUTION: Do not rest the rear wiper arms on the rear door glass without the wiper blades in place or the glass may become scratched.




1. Lift the rear wiper arm (3) until the wiper arm hinge is in its over-center position.
2. Position the blade (1) near the bracket on the tip of the arm.
3. Engage the slot at the upper end of the blade pivot block over the tab of the bracket (2) on the end of the arm.
4. Press the lower end of the pivot block up into the bracket on the tip of the arm until the latch release tabs (see arrows) snap into their locked position. Latch engagement will be accompanied by an audible click.
5. Gently lower the wiper blade onto the glass.