Operation CHARM: Car repair manuals for everyone.
Home >> GMC >> 1984 >> Jimmy Full Size V8-379 6.2L DSL >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> 700-R4 Automatic Transmission >> Subassembly Service >> Case & Internal Components >> Oil Pump Cover & Body Assembly
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Oil Pump Cover & Body Assembly




1. Install oil pump cover onto oil pump body.

2. Install pump cover bolts and tighten finger tight.




3. Using oil pump body and cover alignment tool No. J-21368, or equivalent, align the pump cover and pump body.

4. Install pump to case gasket into case. Retain in position using suitable grease.




5. Install oil seal rings, if removed, onto the pump cover hub. Retain in position using suitable grease.

6. Install pump to case oil seal. Ensure seal is not twisted.

7. Install oil pump assembly thrust washer.




8. Install alignment pins from tool No. J-25025-1, or equivalent, into the case as shown.

9. Install oil pump assembly into case. Ensure all holes are aligned properly.

10. Install oil pump assembly attaching bolts and washers, then torque bolts to specification. Rotate transmission to a horizontal position. If transmission is assembled properly, turbine shaft should turn by hand. If not, identify problem and correct.
pro multis · About Operation CHARM