Front

Heater Blower Assembly:

REMOVE OR DISCONNECT
1. Battery ground cable.
2. Blower motor lead cable .
3. Motor and wheel assembly.
- Five mounting screws.
- Gently pry on the blower flange if the sealer acts like an adhesive.
4. Blower wheel to motor shaft nut.
5. Blower wheel from the motor.

INSTALL OR CONNECT
1. Blower wheel to the motor.
^ Locate the open end of the wheel away from the blower motor.
2. Motor shaft nut.
3. Motor and wheel assembly.
4. New bead of sealer to the mounting flange.
5. Blower motor lead wire.
6. Battery ground wire.
7. Test the blower.