End Gate Window Striker Replacement

Figure 3-End Gate Window Striker and Hinge

REMOVE OR DISCONNECT (Figure 3)

Open the end gate window.
1. Striker to the end gate window pin.
2. Striker to the end gate window bolt.
3. Striker from the end gate window.

INSTALL OR CONNECT (Figure 3)

NOTICE: For steps 2 and 3, refer to "Notice" on page lOA5-1.

1. Striker to the end gate window.
2. Striker to the gate window bolt.

TIGHTEN
Striker to the end gate window bolt to 10 N.m (89 lbs. in.).
3. Striker to the end gate window pin.

TIGHTEN
Striker to the end gate window pin to 1 0 N.m (89 lbs. in.).