External Components

EXTERNAL COMPONENTS

NP233 Transfer Case Components:

NP233 Transfer Case Components - Legend:

INSTALL OR CONNECT
1. Selection plunger (70), poppet spring (71), O-ring seal (69), and poppet screw (68) into front case half (45).

TIGHTEN
- Poppet screw to 15 Nm (11 lbs. ft.).

2. Speed sensor and O-ring to the pump housing (8).

TIGHTEN
- Sensor to 31 Nm (23 lbs. ft.).

3. Vacuum switch (46) and O-ring (47) to the front case housing.

TIGHTEN
- Switch to 24 Nm (17 lbs. ft.).

4. Encoder motor (94) and bolts (95).

TIGHTEN
- Encoder motor bolts (95) to 18 Nm (13 lbs. ft.).

5. Front output yoke (74), rubber sealing washer (75), washer (76), and yoke nut (77).

TIGHTEN
- Yoke nut (77) to 200 Nm (150 lbs. ft.).