Operation CHARM: Car repair manuals for everyone.
Home >> GMC >> 1994 >> Yukon V8-393 6.5L DSL Turbo >> Repair and Diagnosis >> Maintenance >> Drive Belt >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Drive Belt: Service and Repair

This article has been updated with bulletin No.: 66-62-07

DRIVE BELT SERVICE






REMOVE OR DISCONNECT
1. Use a 1/2 inch breaker bar in the square hole provided in the belt tensioner to rotate tensioner counterclockwise and release belt tension.

NOTICE:
Do not rotate the tensioner clockwise. Also, do not allow the tensioner to snap into the "free" position. Either of these conditions could damage the belt and/or the tensioner.

2. Belt.

INSTALL OR CONNECT
1. Route belt over all of the pulleys except the belt tensioner.
2. Use a 1/2 inch breaker bar in the square hole provided in the belt tensioner to rotate the tensioner counterclockwise to the released position.
3. Belt over tensioner pulley. Slowly allow tensioner to move back into installed position.
4. Check the belt for correct "V" groove tracking into each pulley.



pro multis · About Operation CHARM