Operation CHARM: Car repair manuals for everyone.
Home >> GMC >> 1996 >> C 2500 Suburban 2WD V8-5.7L VIN R >> Repair and Diagnosis >> Heating and Air Conditioning >> Compressor Fitting HVAC >> Service and Repair >> Compressor Sealing Washers
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Compressor Sealing Washers

Sealing Washer Installation (1 OF 2):






Important
- When installing sealing washers, keep dirt and foreign material from getting on the sealing surfaces of the washers, hose block, or compressor ports. Clean all sealing surfaces with a lint-free rag.
- Do not reuse sealing washers.
- Sealing washers do not have to be oiled prior to assembly.

Sealing Washer Installation (2 OF 2):






Install or Connect
1. Install sealing washer onto pilots of suction/discharge block fitting. Washers must "bottom" against surface of block fitting.
2. Install hose block to the compressor. Make sure the sealing washers are seated within the compressor machined surfaces.
3. Hold block in place, hand tighten bolt. Tighten Bolt to 34 Nm (25 lb ft).
pro multis · About Operation CHARM