Frontal SIR System Install or Connect

Install or Connect
1. The inflatable restraint Sensing Diagnostic Module (SDM) to the vehicle, making sure the arrow is pointing toward the front of the vehicle.
2. The inflatable restraint Sensing Diagnostic Module (SDM) fasteners.

Tighten
^ Fasteners to 12 N.m (106 lb in).
3. The electrical connector and the CPA.
4. Position the carpet over SDM
5. Sill trim molding - LH.
6. The driver seat.

Enable the SIR system, refer to Air Bag(s) Arming and Disarming.

Tighten
Fasteners to 12 N.m (106 lb in).