Measuring Front Alignment Angles

NOTE:
- Satisfactory vehicle operation may occur over a wide range of front wheel alignment settings. However, if the settings vary beyond specified tolerances, adjustments are needed.
- Set the front wheel alignment to specifications while the vehicle is in its normally loaded condition. Vehicles that are consistently operated with heavy loads should have toe-in adjusted with the vehicle under heavy load. This procedure should result in longer tire life.

MEASURE FRONT ALIGNMENT ANGLES
a. Install alignment equipment according to the manufacturer's instructions.
b. Measure alignment angles and record the readings. If adjustments are required, make them in the following order: caster, camber, and toe-in.