Catalytic Converter: Service and Repair
REMOVE OR DISCONNECT^ Raise and support the vehicle.
1. U-bolts or flange joint from the front and U-bolt from the rear of the catalytic converter assembly.
2. Catalytic converter from front exhaust pipe and intermediate exhaust pipe.
INSTALL OR CONNECT
1. Catalytic converter to the front exhaust pipe and intermediate exhaust pipe.
2. New U-bolts or flange gasket (as equipped) at the front and rear of the catalytic converter.
^ Tighten nuts to 40 Nm (29 ft. lbs.).
^ Check for clearance and alignment.
^ Lower the vehicle.