Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Primary Heating System

Blower Motor Resistor:






Remove or Disconnect

1. Negative battery cable.
2. Roil instrument panel back.
3. Plenum tray.
4. Electrical connector.
5. Screws.
6. Resistor.

Install or Connect

NOTICE: When installing resistor to the heater case, do not let the resistor coils contact each other. Improper system operation or vehicle damage could result.

1. Resistor.
2. Screws.

Tighten
- Screws to 1.4 N.m (12 lb in).

3. Electrical connector.
4. Plenum tray.
5. Roll instrument panel forward.
6. Negative battery cable.
- Check circuit operation.