Armrest Bracket

Removal Procedure

Tools Required
J 34940 Rivet Gun

1. Remove the trim panel.
2. Remove the water deflector.
3. Remove the armrest bracket from the door.
3.1 Drill out the rivets.
3.2 Disconnect the control rods from the retainers.
4. Remove the retainers and the U-nuts from the bracket.

Installation Procedure

1. Install the retainers and the U-nuts to the bracket.
2. Install the armrest bracket to the door.
2.1 Connect the control rods from the retainers.
2.2 Use the J 34940 in order to install the bracket rivets.
3. Install the water deflector.
4. Install the trim panel.