Fuel Tank Pressure Sensor: Service and Repair

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.

1. Disconnect the negative battery cable.
Relieve the fuel pressure. Refer to Fuel Pressure Relief Procedure. Service and Repair
2. Drain the fuel tank. Refer to Fuel Tank Draining Procedure. Service and Repair
3. Lower the fuel tank.
4. Remove the fuel tank.
5. Disconnect electrical connector.
6. Remove Fuel Tank Pressure sensor (1) from fuel sender assembly (2)

INSTALLATION PROCEDURE
1. Install the Fuel Vapor Pressure Sensor (1) on the fuel sender assembly (2).
2. Reconnect electrical connector
3. Install the fuel tank.
4. Reconnect the negative battery cable.