Window Track: Service and Repair

REMOVAL PROCEDURE
1. Roll the window up completely.
2. Remove the trim panel.
3. Use a sharp bladed tool, if needed, in order to separate the water deflector at the perforations. Refer to Water Deflector Replacement - Front Door. Water Deflector Replacement - Front Door
4. Remove the door to window run channel bolt.
5. Pull the run channel away from the upper channel (which is part of the door) in order to remove the window run channel from the door.

INSTALLATION PROCEDURE
1. Slide the clip of the channel into the upper channel in order to install the window run channel to the door.

NOTE: Refer to Fastener Notice in Cautions and Notices.

2. Install the door to window run channel bolt.

Tighten
Tighten the door to window run channel bolt to 9.5 N.m (84 lb in).

3. Install the water deflector.
4. Install the trim panel.