Radio/Audio System Operation (RPO UNO)

TO PLAY A COMPACT DISC
In order to operate the compact disc player, perform the following steps:
1. Press the PWR knob in order to turn the system ON.
2. Insert a disc part way into the slot, label side up. The player will pull the disc in.
3. Wait a few seconds.
4. The disc should then begin to play. A CD symbol and CD will appear in the display.
5. If the disc is very hot, or if you're driving on a very rough road, a disc may come out or just not play. When the disc player is too hot to play a disc, ERR will appear on the display.
6. Press RECALL in order to cancel ERR.

When the disc player returns to normal temperature, the disc should play again.
If the disc still will not play, check for the following possible problems:
1. An upside down disc
2. A dirty, scratched, or wet disc
3. Too much moisture in the air

If there is too much moisture in the air, wait about one hour and try again.

RECALL (RECALL)
^ Press RECALL in order to see what track is playing, and the elapsed time.
^ Press RECALL again within 5 seconds in order to view elapsed time. The elapsed time is displayed in minutes and in tenths of a second.
^ Press RECALL again in order to return to the time of day.
^ The track number appears when a new track starts to play.

PREVIOUS TRACK (PREV)
Press SEEK down or PREV in order to search for the previous selection. If you hold this button in or press it more than once to continue the search for previous tracks.

RANDOM PLAYBACK (RDM)
The random playback (RDM) feature allows the tracks on the compact disc to be played in random order rather than in sequential order. In order to stop the random playback feature, press RDM.
During random playback, a RANDOM indicator appears in the display.

NEXT SELECTION (NEXT)
Press SEEK up or NEXT in order to search for the next selection. Hold the push-button or press it more than once in order to advance the disc further. Audio is muted during NEXT.

REVERSE (REV)
Press and hold the REV button in order to return rapidly to a favorite passage. This is an audible search at a high rate of speed.
Release REV in order to resume play at a normal speed.

FORWARD (FWD)
Press and hold FWD in order to advance quickly within a track. This is an audible search at a high rate of speed.
Release FWD in order to resume play at normal speed.

BAND SWITCHING (AM/FM)
While a compact disc is playing, press the AM/FM push button in order to cancel the CD player and turn ON the radio.
The CD symbol will still be displayed, but the word CD will be replaced by FM1, FM2, or AM in the display. If the radio is turned OFF during compact disc playback, the disc stays in the player. The CD will resume playing at the point where the CD stopped.

COMPACT DISC/AUXILIARY (CD/AUX)
The CD/AUX push-button toggles between CD play mode and radio operation. When a CD is inserted, the CD plays until the AM/FM push-button is pressed. The CD will cease playback and the radio will play after the AM/FM push button is pressed.

ELECTING A COMPACT DISK (EJECT)
Press EJECT in order to release the disc from the CD player. The disc will eject and the radio will play. The disc will start at track 1 when you reinsert it.

For a description of the RPO Code(s) shown in this article/images refer to the RPO Code List found at Vehicle/Application ID Application and ID