Interior Lighting Module: Service and Repair
INTERIOR LAMP CONTROL MODULE REPLACEMENTREMOVAL PROCEDURE
1. Remove the bolts (2) that retain the instrument panel center support bracket to the steering column bracket (1).
2. Remove the bolt (3) that retains the reinforcement to the instrument panel center support bracket.
3. Disconnect the electrical connector from the illuminated entry module.
4. Remove the instrument panel center support bracket (4).
5. Remove the illuminated entry module retainer (3).
6. Remove the illuminated entry module (2) from the instrument panel center support bracket.
INSTALLATION PROCEDURE
1. Install the illuminated entry module (2) to the instrument panel center support bracket.
2. Install the illuminated entry module retainer (3).
3. Connect the electrical connector to the illuminated entry module.
4. Install the instrument panel center support bracket (4).
NOTE: Refer to Fastener Notice in Service Precautions.
5. Install the bolt (3) that retains the reinforcement to the instrument panel center support bracket.
Tighten
Tighten the bolt to 2 N.m (18 lb in).
6. Install the bolts (2) that retain the instrument panel center support bracket to the steering column bracket (1).
Tighten
Tighten the bolts to 65 N.m (47 lb ft).